Reset Haier • Roku TV settings
To reset only the TV picture and audio settings to their original values, navigate to Settings > System > Factory Reset,
and then highlight Reset TV settings. Read the information on the screen to make sure you understand what the reset
To proceed with the reset operation, press
three times in a row.
Factory reset everything
A full factory reset returns the TV to its original, out-of-the-box state. When finished, you must repeat Guided Setup,
reconnecting to the Internet, re-linking your Roku account, and reloading any streaming channels. You also must
repeat Antenna TV setup and input configuration.
Factory reset is the recommended choice if you want to transfer the TV to another owner, and is the only choice if you
want to switch from store mode to home mode (if you inadvertently selected store mode during Guided Setup).
To perform a factory reset, navigate to Settings > System > Factory reset, and then highlight Factory reset everything.
Read the information on the screen to make sure you understand what this reset operation does.
To proceed with the full factory reset, press
three times in a row.
Getting system updates
If your TV is connected to the Internet and linked with a Roku account, it will automatically get updates from time to
time. You don't need to do anything. But if you are aware that an update is available and you don't want to wait until
the TV updates itself, you can manually check for updates.
If your TV is not connected to the Internet, you can still get updates by using a USB flash drive.
You can download an updated User Guide that matches your Roku TV software version from the Haier web site at:
To determine your current Roku TV software version, go to Settings > System > About after you complete Guided
Checking for updates on a connected Haier • Roku TV
If you're one of those people who has to have the latest, most up-to-date gadgets the moment they are available, you
can check for updates as often as you want.
To check for updates, navigate to Settings > System > System update, and then select Check now. The TV responds
either with a message saying that your TV is up to date, or with a message saying that an update is available.
Follow the instructions on the screen to install the system update.
Getting updates on a non-connected Haier • Roku TV