With the preliminaries out of the way, it's time to turn on your Haier • Roku TV. As the TV starts for the first time, it
leads you through Guided Setup, which configures the TV before you start to use it.
During Guided Setup, you'll:
Answer a few questions
Provide network connection information
Get a software update
Link your Roku TV to your Roku account.
Connect devices such as a DVD player, game console, or cable box.
Note: Guided Setup only runs the first time you turn on your Roku TV. If you need to run Guided Setup again,
you'll have to perform a factory reset, as explained in
Starting guided setup
To start Guided Setup, press the red POWER button on the remote control to turn on your Roku TV.
When you first turn on your Roku TV, it will take a few seconds to get itself ready. You'll notice the following things
1. The status light blinks every time the TV is busy doing something; in this case it's powering up and getting
ready for you.
2. The power-on screen appears and the status light blinks slowly for a few more seconds. The power-on screen
displays a Roku TV logo while the TV starts up.
3. After a few seconds, Guided Setup starts:
Setting up your Haier • Roku TV
With the first Guided Setup screen on your TV, follow these steps to set up your TV:
1. Press OK or
on the remote control to go to the next screen:
everything" on page 61 .