Start-Up; Electrical Connection/Foot Control; Main Switch; Thread Reel Holder - Pfaff 1080S Operation And Safety Notes

Start-up

Disconnect the machine from
the power supply by remov-
ing the plug from the socket.
Before you use the machine for the first time,
wipe off any oil residue that could have accu-
mulated in the vicinity of the needle plate dur-
ing transport.
Electrical connection/foot
control
Plug the mains plug (1) of the machine into the
mains socket (2) as shown. Connect the plug
(3) of the foot control to the connection socket
of the sewing machine.
Note: The sewing machine cannot be started
up if the foot control is not connected.
1
5
Main switch to
1
OFF/AUS
Plug-in connector
2

Main switch

Your sewing machine will only sew if the main
switch is switched on. The sewing light is also
switched on and off by the main switch. Dis-
connect the plug from the socket before you
carry out any maintenance or change the
needle.
90 GB
113223_Naehmaschine_Pfaff_Content_FR.indd 90
1
2
3
2
3
4
Mains connection
3
lead
Foot control
4
Connection socket
5
Main switch OFF/AUS:
Main switch ON/EIN:

Thread reel holder

HORIZONTAL THREAD REEL HOLDER
Put the thread reel onto the reel holder and
secure it with a spool cap so that the thread
will run smoothly. If the thread reel is equipped
with a thread tension disc, this should be fac-
ing to the right.
VERTICAL THREAD REEL HOLDER FOR
LARGER THREAD REELS
Attach the thread reel holder and fix with a
washer. Place a thread reel on the reel holder.
6 1 5 4
Thread reel
1
Washer
2
Vertical thread reel
3
holder
1
2
3
Thread reel holder
4
Thread tension disc
5
Spool cap
6
02.02.15 10:00