Adjustment
13
Adjusting the hot air nozzle
.04
13
Lateral adjustment
.04.01
● Switch on the machine and set the sealing temperature to its minimum value.
● Call up the input mode.
● Position the heating element.
● Adjust screw 1 (screws 2) in accordance with requirement .
● Switch off the machine.
72
Requirement
When hot air nozzle 3 is engaged, seen in the feed direction it should be centred to the
feed roller 4.
Fig. 13 - 02
Let the heating element cool down!
Danger of burns if the heating element is touched!
2
1
2
4
3
3