Maintenance And Care; Maintenance Intervals; Cleaning The Machine - Pfaff 3819 series Instruction Manual

11

Maintenance and Care

11

Maintenance intervals

.01
Cleaning the hook area .............................daily, several times during continuous operation
Cleaning the complete machine ............................................................................... weekly
Machine oil level .................................................................................. daily, before start-up
Checking / setting the air pressure ...................................................................... as needed
Cleaning the maintenance unit air fi lter ............................................................... as needed
11

Cleaning the machine

.02
The required cleaning cycle for the machine depends on the following factors:
 Single or multi-shift operation
 Dust formation caused by the workpieces
Optimal cleaning instructions can therefore only be determined on a case-by-case basis.
2
Fig. 11 -01
These maintenance intervals are based on an average running time of a single
shift production shop. Shorter maintenance intervals are recommended for in-
creased running times.
Disconnect the machine from the electricity mains for all cleaning work by
shutting off the main switch or removing the mains plug! Risk of injury due to
accidental machine start-up!
1
Maintenance and Care
The following tasks are recommended
during a single shift operation to avoid
operational errors:
 Open the hook area cover 1.
 Daily, clean the hook area 2 more
frequently during continuous operation.
 Close the gripper area cover!
Only operate the machine
when the hook room cover is
closed!
Risk of injury due to moving
parts!
51