C Tour Mode Settings (Tour) - Sanyo VCC-9000EBCP/EBSP Instruction Manual

AUTOMATIC MODE SETTINGS

C Tour mode settings (TOUR)

1 Setting a new tour mode
Select "TOUR", and then tilt the joystick
lever to c.
The tour setting screen will be displayed.
·TOUR No.
TRACE
SHOW
RUN
BACK
2 Setting a tour mode number
1
Select "TOUR No.", and then tilt the joystick lever
to c.
The "TOUR No." setting will flash.
2
Tilt the joystick lever to j or l to set the number,
and then tilt it to d.
Available settings: 001–004
Storing a tour
3
1
Select "TRACE", and then tilt the joystick lever to
c.
The tour recording screen will be displayed.
CALL PRESET 1 TO
CONFIRM......
0/100
TRACE......
2
This lets you record zoom operations made by the
joystick lever.
Up to a maximum of 1000 commands can be stored.
3
To stop recording, press the 1 button and then the
ENTER button.
If the recording area is full, recording will stop
automatically.
1
Select "BACK", and then tilt the joystick
4
lever to c to complete the setting.
: 001
0/100
Total percentage
Usage amount for
stored command
ENTER
Checking and starting a tour mode
1 Select "TOUR", and then tilt the joystick
lever to c.
The tour mode setting screen will be displayed.
Select "TOUR No.", and then tilt the
2
joystick lever to c.
The "TOUR No." setting will flash.
Tilt the joystick lever to j or l to select a
3
tour mode number to be checked or
started, and then tilt it to d.
Checking a tour mode
4
Tilt the joystick lever to j or l to select
"SHOW", and then tilt it to c.
Tour mode will be carried out once, and then the display
will return to the menu screen.
5 Starting a tour mode
Select "RUN", and then tilt the joystick
lever to c.
The tour mode will start.
To stop the tour mode, use the joystick lever of the
system controller.
NOTE:
• Recording of a tour mode will start once the first operation
is carried out.
• You can also start the tour mode using the TOUR and +
buttons of the system controller.
• Once 1000 commands have been recorded, the preset
screen will be exited automatically.
6 Select "BACK", and then tilt the joystick
lever to c to complete the setting.
- 36 - English