Auto Mode Settings (Auto Mode); A Monitoring Multiple Preset Positions - Sanyo VCC-9700P Instruction Manual

Auto Mode Settings (AUTO MODE)

The Auto mode can be used to operate the camera automatically to monitor multiple surveillance locations. There are four types of
automatic panning available in Auto mode: Sequence mode (SEQUENCE), Tour mode (TOUR), Auto Pan mode (AUTO PAN) and Auto
Return (AUTO RETURN).
A
Monitoring multiple preset positions sequentially (SEQUENCE)
The Sequence mode allows you to monitor multiple preset positions sequentially by using the sequence group containing preset positions.
SEQUENCE A
EDIT SET y
ORDER STEP
PAUSE TIME 5S
[SEQ SPEED]
8
RUN SET y
MENU BACK
B
Panning between two surveillance locations in loop (AUTO PAN)
The Auto Pan mode allows you to pan between two surveillance locations in loop. In this mode, you set a start point, an end point, moving speed,
panning direction and other options.
AUTO PAN 1
POSITION START y
PAUSE TIME 3S
DIRECTION LEFT
[PAN SPEED]
8
RUN y
SET
MENU BACK
C
Repeating a recorded monitoring process (TOUR)
You can repeat a monitoring process by recording an image track of all camera pan, tilt and zoom operations.
TOUR 1
TRACE SET y
RUN SET y
MENU BACK
D
Returning automatically to the specified surveillance mode (AUTO RETURN)
You can automatically return the surveillance status to the specified surveillance mode after the specified duration has passed without any
operations. (P37)
33
CAMERA SET y
LENS SET y
PAN/TILT SET y
AUTO MODE SET y
ALARM SET y
SET
PRIVACY MASK y
PASSWORD SET y
LANGUAGE SET y
OPTION SET y
PRESET OFF
BACK
MENU
Start point surveillance
location
☞
60 seconds
AUTO MODE
SEQUENCE
AUTO PAN
TOUR
AUTO RETURN
TIME
PRESET
MENU
☞
P34
End point surveillance
location
P36
A
A y
1 y
B
1 y
SEQ A
1M
C
D
OFF
BACK
☞
P35