SERVICE MANUAL
COLOUR CCD Camera
SPECIFICATIONS
TV system : PAL standard (625 TV lines, 25 frames/sec.)
Scanning system : 625 TV lines, 50 field/sec., 2:1 interlace
Image device : Interline transfer method, 1/3 inch solid state CCD
Picture elements : 795 (Horizontal) x 596 (Vertical)
Effective picture elements : 752 (Horizontal) x 582 (Vertical)
Synchronization system : Internal sync.
Resolution : 480 TV lines horizontally, 400 TV lines vertically
Video output signal level : 1.0 Vp-p/75 Ω (screw-on terminal)
S/N ratio : More than 48 dB
Minimum required illumination : 1.8 lux (F 1.6 lens)
White balance : A (Automatic: TTL system)/M (Manual) manual switching
Backlight compensation : 1 (On)/0 (Off) manual switching,
Active-zone light measuring system
Backlight compensation iris level adjustment : Manual LEVEL volume control
Aperture : 1 (High)/0 (Normal) manual switching
Gain control : Automatic
MONITOR output pin : 1.0 Vp-p/75 Ω, test point pin
Lens : F1.6 ~ 2.3, f=2.6 ~ 6.0 mm, varifocal lens, manual zoom and focus adjustment
Iris system : Mechanical auto iris
Operational environmental conditions : Temperature: -10 °C ~ + 50 °C
Storage environmental conditions : Temperature: -20 °C ~ + 60 °C
Power supply : 12-15 V DC/ 24 V AC, 50 Hz
Power consumption : 3.5 W
Weight : Approx. 420 g
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
L5AR2/XE
Humidity: less than 90 %
Humidity: less than 70 %
PRODUCT SAFETY NOTICE
FILE NO.
VCC-9615P
(Product Code : 117 047 15)
(Europe)
CONTENTS
1. DISASSEMBLY, VR AND TP LOCATION
AND BOARD LOCATION .................... 2
2. ADJUSTMENT .....................................3
3. PARTS LIST ......................................... 5
CIRCUIT DIAGRAM &
PRINTED WIRING BOARDS ................. C1
REFERENCE No. SM5310516