Advertisement
SETTINGS AND ADJUSTMENTS
The digital process may disturb the image for about 5 seconds after the camera is
turned on.
Factory settings
The camera is shipped from the factory with the following settings. These settings should give
adequate results under normal conditions. If the settings need to be modified, please consult
the reseller or installer.
A: Color adjustment (B: blue gain, R: red gain) volume controls . . . About the center
B: WB (white balance) switch . . . . . . . . . . . . . . . . . . . . . . . A (automatic)
C: BLC (backlight compensation) switch . . . . . . . . . . . . . . . . . . . . . 0 (OFF)
D: SYC (synchronization) switch
E: LEVEL volume control . . . . . . . . . . . . . . . . . . . . All the way to the left
F: L-PHASE (line phase) volume control . . . . . . . . . . . . . . . About the center
Backlight compensation setting
When the subject is backlit, set the BLC switch to 1 (ON).
The backlight compensation will measure the light in the center area of the image and the lens
iris will be automatically set for optimum image quality. The subject contained in this area will
be clear and bright.
•
When the sides of the subject background are very bright, and the subject itself is dark.
11
English
. . . . . . . . . . . . . . . . . . . . . . 0 (Internal)
A B
C D E F
WB
BLC
SYC
M
A
WB BLC SYC
Advertisement
