A Sequential Pan Setting; B Tour Mode Setting - Sanyo VCC-9300P Instruction Manual

AUTO MODE SETTINGS

A Sequential pan setting

Example: Sequential pan will be set to RANDOM, surveillance
location pause time will be 10 seconds, and pan
speed to next surveillance location will be 5
seconds.
1
Set the PRESET POSITIONS (See p00)
2
In the MAIN MENU, select SEQ for AUTO MODE and press
the ENTER button.
The SEQUENCE screen will appear.
3
Use the joystick lever (d or c) to select ORDER.
(Ex: RANDOM)
Available settings:
•
STEP: locations are shown sequentially pan from smallest
to largest PRESET POSITION numbers
•
RANDOM: locations are shown in a random sequentially
pan
4
Use the joystick lever (j or l) to move the cursor to
"5S" for PAUSE TIME, then use the joystick lever (d or
c) to select the pause time. (Ex: 10S)
Available settings: To set pause times to be the same for all
surveillance locations regardless of
differing pause time values set for
individual PRESET POSITIONS, set the
PAUSE TIME to a numerical value. To
use the differing pause times set for
individual PRESET POSITIONS, set the
PAUSE TIME to "PRE".
Pause times: 3S, 5S, 10S, 15S, 20S, 30S, 45S, 60S, PRE
(PRE uses individual values recorded for each
of the PRESET POSITIONS.)
5
Use the joystick lever (j or l) to move the cursor to the
SEQ SPEED value, then use the joystick lever (d or c) to
set the speed for panning to new surveillance locations.
(Ex: 5)
Available settings: 0 – 15 (fast)
6
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The MAIN MENU screen will
reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
SEQUENCE
ORDER RANDOM
PAUSE TIME 5S
[SEQ SPEED]
15
MENU BACK
– 36 –

B Tour mode setting

Example: A 30 second image track of camera pan, tilt and
zoom operations will be recorded for TOUR 2.
1
In the MAIN MENU, select TOUR for AUTO MODE and
press the ENTER button.
The TOUR screen will appear.
2
Use the joystick lever (d or c) to select the TOUR image
track. (Ex: 2)
Available values for TOUR:
•
1: Recording of 30 seconds of camera pan, tilt and zoom
operations.
•
2: Recording of 30 seconds of camera pan, tilt and zoom
operations.
•
W: Recorded pan, tilt and zoom camera operations for
TOUR 1 and TOUR 2 are cleared after they are
combined to form a separate 60 second image track.
3
Use the joystick lever (j or l) to move the cursor to
TRACE, then use the joystick lever (c) to select a ON.
Then press the ENTER button.
The confirmation message "OK?" will blink under ON.
ENTER
4
Press the ENTER button again.
The "OK?" message will disappear and "ON" will blink.
TOUR
TOUR 2
TRACE OFF ‚
MENU BACK
TOUR
TOUR 2
TRACE ON ‚
OK?
English