C Lens Starting Point Position Setting; (Set North) - Sanyo VCC-9000EBCP/EBSP Instruction Manual

PAN AND TILT SETTINGS
C Lens starting point position
setting (SET NORTH)
This stores the starting point for the direction of the camera
lens, so that when the power is turned on, the camera moves
straight to the set starting point.
Move the joystick lever so that the camera
1
lens faces in the required direction.
Select "SET NORTH", and then tilt the
2
joystick lever to c.
"......" will flash and the current camera lens
direction will be stored, and that position will become
"north".
The pan position stored in the "SET NORTH" setting will
be at "0".
AUTO STOP IDLE
PROPORTIONAL PAN:ON
·SET NORTH......
BACK
3 Select "BACK", and then tilt the joystick
lever to c to complete the setting.
:020
- 30 -
Direction screen display
When "DIRECTION" in the "DISPLAY CONFIGURATION"
system setting is set to "ON", the direction and angle of the
camera lens will be displayed.
(Display example)
N 331 30
N 331 30
Direction* Pan angle
* Pan angle of "0" is directly due north.
Direction display for different pan angles
Direction Pan range
N 331–30
NE 31–60
E 61–120
SE 121–150
NW
330
300
W
240
210
SW
Tilt angle 0–90
X1
Tilt angle
Direction Pan range
S 151–210
SW 211–240
W 241–300
NW 301–330
N
NE
30
60
E
120
150
SE
S
English