Assembling Crankcase Half - Arctic Cat 450 XC 2011 Service Manual

3. Install the low driven bushing (10), bearing (9), and
gear (11) on the countershaft; then install splined
washer (12).
4. Place the reverse driven bushing (13) onto the shaft;
then install the bearing (14), gear (15), and splined
washer (16). Secure with a snap-ring.
5. Install the reverse dog on the shaft; then place the
shift forks and shift shaft into position.
FI667A
FI666
 NOTE: The countershaft assembly is now ready to
be installed.
Assembling Crankcase
 NOTE: For ease of assembly, install components on
the right-side crankcase half.
 NOTE: If the output shaft was removed, make sure
that the proper shim is installed.
1. Install the output shaft into the crankcase making
sure the two gears, shim, washer, and nut are in the
correct order.
FI665A
FI664
Manual
Table of Contents
Half
MD1199
FI663
FI662
61