Arctic Cat 450 XC 2011 Service Manual page 64

8. Align the shift forks to allow engagement with the
shift cam; then engage the shift forks and slide the
shift fork shaft into the locating boss in the crankcase.
9. Install the input driveshaft.
FI662
10. Install the spacer (1), shaft (2), reverse idler gear, and
washer (3).
FI653
11. Install the secondary output driveshaft assembly into
FI653A
the crankcase half making sure the front and rear bear-
ing alignment pins are seated in the recesses; then
install the center carrier bearing alignment C-ring.
FI655A
Manual
Table of Contents
FI646
FI641A
FI645
FI660A
63