Arctic Cat 450 XC 2011 Service Manual page 61

4. Remove the splined washer; then remove the circlip
securing the high-low sliding dog. Remove the slid-
ing dog.
5. Remove the circlip securing the high driven gear;
then remove a washer, the high driven gear along
with the bearing and bushing, and remove the high
driven washer.
60
FI667
ASSEMBLING
1. With the high driven washer (1) on the countershaft,
install the high driven gear bushing (3), bearings (2),
and gear (4) on the countershaft; then install the
washers (5) and secure with the snap-ring.
FI668
FI669
2. Install the high/low shift dog (6) on the countershaft
and secure with snap-ring (7); then install the splined
washer (8).
FI670
Manual
Table of Contents
FI671
FI671A
FI670
FI668A