Arctic Cat 450 XC 2011 Service Manual page 57

2. Remove the reverse idler assembly (B). Account for
and note the location of the inner bushing (1), idler
shaft (2), and outer washer (3).
3. Remove the driveshaft (C); then pull the shift fork
locating shaft (D) out of the crankcase locating boss
and allow the shift forks to disengage from the gear
shift shaft (F).
56
4. Remove the gear shift shaft (F) noting the inner and
outer washers.
FI661A
5. Remove the countershaft assembly (E) along with
the shift fork assembly.
FI641A
6. Remove the crank balancer driven gear (G) and
account for a key; then remove the crankshaft bal-
ancer shaft.
FI646
7. Using Crankcase Separator/Crankshaft Remover
with the appropriate crankshaft protector, remove the
crankshaft.
FI653A
Manual
Table of Contents
FI650A
FI662
MD1024