Arctic Cat 450 XC 2011 Service Manual page 49

4. Remove the movable drive face and spacer. Account
for the movable drive face rollers and outer drive
face cover.
5. Using a 6 mm cap screw threaded into the fixed
driven face, spread the driven pulley by turning the
cap screw clockwise; then remove the V-belt.
48
MD1033
6. Remove the fixed drive face.
7. Remove the nut holding the driven pulley assembly;
MD1035
then remove the driven pulley assembly.
MD1034
8. Using an impact screwdriver, remove the three Phil-
lips-head cap screws holding the air intake plate.
Remove the air intake plate.
MD1036
Manual
Table of Contents
KC132
MD1094
MD1068
MD1092