Air Removal - Hts™/Straight Blades - Western HTS Owner's Manual

Air Removal – HTS™ & Straight Blades
11. Turn the control ON and completely angle
blade to the left and right several times. Turn
the control OFF.
12. Fill the reservoir to the top of the fi ll hole and
replace the fi ll plug.
NOTE: Loosen fi ll plug slowly to relieve any
pressure in the reservoir.
Lit. No. 49513, Rev. 00
MAINTENANCE
13. Turn the control ON and raise and lower the
snowplow several times. Activate the control
FLOAT function and manually collapse the
lift ram all the way after each lowering of the
blade. Turn the control OFF.
14. Fill the reservoir to the top of the fi ll hole and
replace the fi ll plug.
HTS™ blades: Fill to within 2-1/2" from the
top of the fi ll hole and replace the plug.
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
95
WARNING
August 15, 2011