Operating Your Snowplow; Cab Controls; Straight Blade Hand-Held Control - Western HTS Owner's Manual

STRAIGHT BLADE CabCommand
HAND-HELD CONTROL
WARNING
To prevent accidental movement of the
blade, always push the ON/OFF button
to switch the control OFF whenever
the snowplow is not in use. The power
indicator light will turn OFF.
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position.
2. Press the ON/OFF button on the control. The
power indicator light glows red, indicating the
control is ON. The power indicator light glows
red whenever the control and the vehicle
ignition switch are both ON and the electrical
connections to the snowplow are completed.
The ON/OFF button operates as an
emergency stop if required.
Lit. No. 49513, Rev. 00

OPERATING YOUR SNOWPLOW

FLOAT Light
(green)
FLOAT
RAISE
1
L
3
LOWER
Function Time-Outs
All control functions, except LOWER/FLOAT, time
out (stop) automatically after a period of time. This
is to limit the amount of electrical energy required
from the vehicle.
NOTE: If control function times out before
desired blade movement is complete, release
button and press again.
33
Power Indicator
Light (red)
ON/OFF
ON/OFF Button
2
(Emergency Stop)
R
4
August 15, 2011