Straight Blade Hydraulic Unit Cover-Remove And Replace - Western HTS Owner's Manual

STRAIGHT BLADE HYDRAULIC UNIT
COVER – REMOVE AND REPLACE
Snowplow Attached to Vehicle
1. Lower the blade to the ground. Place the
control in FLOAT, fully collapsing lift ram. Turn
the control OFF.
2. Remove the two hairpin cotters, washers and
pins attaching the lift arm to the lift frame.
3. Pivot the lift arm and lift ram forward and
remove or replace the cover.
4. Reassemble the lift arm to the lift frame with
the pins, washers and hairpin cotters removed
in Step 2.
Lit. No. 49513, Rev. 00
MAINTENANCE
Pin
81
Washer
Hairpin
Cotter
Lift
Arm
Lift
Ram
August 15, 2011
Pin
Cable
Boot
Lift
Frame