Western HTS Owner's Manual page 81

Snowplow Not Attached to Vehicle
1. Tilt the lift frame forward to create slack in the
lift chains. On the driver-side lift chain, mark
the link attaching it to the lift arm.
2. Unhook the driver-side lift chain from the lift
arm, remove the slack and hook the chain
in the slot between the cable boot and the
driver's side of the lift frame.
3. Remove the two hairpin cotters, washers and
pins attaching the lift arm to the lift frame.
4. Pivot the lift arm and lift ram forward and
remove or replace the cover.
5. Reassemble the lift arm to the lift frame with
the pins, washers and hairpin cotters removed
in Step 3.
Lit. No. 49513, Rev. 00
MAINTENANCE
Pin
6. Unhook the driver-side lift chain from the lift
frame and hook the marked chain link onto the
lift arm.
82
Washer
Hairpin
Cotter
Pin
Lift
Arm
Lift
Ram
Cable
Boot
DS Lift
Chain
Lift
Frame
August 15, 2011