Western HTS Owner's Manual page 46

Function Description of Operation
With wings in a straight line, move the
control lever straight to the left to move
L
both wings to the angle left position to
(Angle
cast snow to the driver's left side. The left
Left)
wing retracts while the right wing extends.
Function times out after 3.25 seconds.
With wings in a straight line, move the
control lever straight to the right to move
R both wings to the angle right position
(Angle to cast snow to the driver's right side.
Right) The right wing retracts while the left
wing extends. Function times out after
3.25 seconds.
Lit. No. 49513, Rev. 00
OPERATING YOUR SNOWPLOW
Scoop/Retract Blade Position
Moving the control lever from the center position
toward the word SCOOP or RETRACT on the face
of the control body will cause both wings to move
at the same time into the following blade positions.
Function Description of Operation
Move the control lever toward the word
SCOOP on the control face to extend both
SCOOP
wings forward into the scoop position.
Function times out after 5.5 seconds.
Move the control lever toward the
word RETRACT on the control face to
RETRACT draw both wings into the fully retracted
(vee) position. Function times out after
4.5 seconds.
47 August 15, 2011