Western HTS Owner's Manual page 38

Function Description of Operation
Move the control lever straight to the left
L
to angle the blade left. Function times out
(Angle Left)
after 3.25 seconds.
R Move the control lever straight to the right
(Angle to angle the blade right. Function times
Right) out after 3.25 seconds.
NOTE: If control function times out before
desired blade movement is complete, release
the lever to the center position, then move
back into the desired function.
Lit. No. 49513, Rev. 00
OPERATING YOUR SNOWPLOW
SECURITY GUARD™ System (1, 2, 3, 4)
Moving the control lever from the center position
toward any of the four digits on the face of the
control body will operate the SECURITY GUARD
system. See "SECURITY GUARD System" in this
section for more information.
39 August 15, 2011