Ballast Requirements - Western HTS Owner's Manual

BALLAST REQUIREMENTS

Ballast (additional weight) is an important part of
qualifying vehicles for snowplow eligibility. Rear
ballast must be used when necessary to remain
in compliance with axle ratings and ratios as
specifi ed by the vehicle manufacturer.
If ballast is required, it is important that it be
secured properly behind the rear axle. A ballast
retainer kit is available from your WESTERN
outlet (PN 62849).
NOTE: The ballast retainer kit is for snowplow
vehicles requiring ballast. See your WESTERN
outlet for the correct amount of ballast
required. Include the weight of the retainer as
part of the ballast requirement. Sand bags are
recommended for use as ballast.
Lit. No. 49513, Rev. 00
VEHICLE APPLICATION INFORMATION
®
NOTE: Ballast recommended and its weight
calculations assume the entire width of the
bed is fi lled as close to tailgate as possible.
as close to the tailgate
16
Position
and secure ballast
as possible.
August 15, 2011