Western HTS Owner's Manual page 77

REMOVING SNOWPLOW FROM VEHICLE & STORAGE
NOTE: After each use of the snowplow,
reapply dielectric grease to the electrical
plugs to maintain the protective coating on the
terminals.
NOTE: Place electrical plugs in storage
position. Insert the plow cable and headlamp
harness into the cable boot on the lift frame.
Install plug covers on the vehicle cable and
headlamp harness.
Lit. No. 49513, Rev. 00
STORAGE
Your snowplow is designed to be moved into
a storage location using your vehicle and plow
attaching system. For easier attaching of the
snowplow, store it on a hard, level surface.
78 August 15, 2011