General Instructions - Western HTS Owner's Manual

Snowplow
Hide thumbs Also See for HTS:
Table of Contents

Advertisement

CAUTION
Never stack snow with the blade angled.
This could damage the snowplow or the
vehicle bumper.
CAUTION
Plowing speed should not exceed 10 mph
(16 km/h).
NOTE: Only the driver should be in the vehicle
cab when the snowplow is attached.
Lit. No. 49513, Rev. 00
OPERATING YOUR SNOWPLOW

General Instructions

1. Before plowing, make sure you know of any
obstructions hidden beneath the snow such as
bumper stops in parking lots, curbs, sidewalk
edges, shrubs, fences or pipes sticking up
from the ground. If unfamiliar with the area to
be plowed, have someone familiar with the
area point out obstacles.
2. If possible and you have good visibility, plow
during the storm rather than letting snow
accumulate.
3. Do not exceed 10 mph (16 km/h) when
plowing snow.
4. When you are stacking snow, begin raising
the blade as you come close to the stack. This
will let the blade ride up the stack.
71
August 15, 2011

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Western HTS

Table of Contents