Cab Controls - Western HTS Owner's Manual

CAB CONTROLS

WARNING
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
WESTERN ® snowplows come equipped with
one of two special controls: the CabCommand
hand-held control or a joystick-style control.
The MVP PLUS™ controls allow you to go from
a V-plow, to a scoop, to a standard straight-blade
snowplow, all at the touch of a button or single-
lever movement.
The WIDE-OUT™ controls allow you to go from a
retracted position to a scoop position, in addition
to all the standard straight-blade positions, at the
touch of a button.
Lit. No. 49513, Rev. 00
GETTING TO KNOW YOUR SNOWPLOW
Each control has its own ON/OFF switch with an
indicator light to show when the control is powered
up. Your vehicle ignition (key) switch controls a
fused circuit that powers your cab control directly
from the battery.
The ON/OFF switch on the cab control allows
you to turn OFF the control and prevent blade
movement even when the ignition switch is ON.
The control ON/OFF switch serves as an
emergency stop if required.
All controls are protected by a replaceable fuse
located in the under hood snowplow electrical
system. See "Fuse Replacement" in the
Maintenance section of this Owner's Manual.
27 August 15, 2011