Mounting Snowplow To Vehicle - Western HTS Owner's Manual

MOUNTING SNOWPLOW (ON)
WARNING
Keep 8' clear of the blade drop zone when
it is being raised, lowered or angled. Do
not stand between the vehicle and blade
or directly in front of blade. If the blade
hits you or drops on you, you could be
seriously injured.
WARNING
Inspect snowplow components and bolts
for wear or damage whenever attaching
or detaching the snowplow. Worn or
damaged components could allow the
snowplow to drop unexpectedly.
NOTE: Use dielectric grease to prevent
corrosion on all connections.
Lit. No. 49513, Rev. 00

MOUNTING SNOWPLOW TO VEHICLE

• Remove the electrical plug and disconnect
electrical plugs from storage position.
• Align vehicle receiver brackets with snowplow
horns and drive vehicle slowly forward until
snowplow horns fully seat inside receiver
brackets.
• Turn the vehicle ignition to the "OFF" position.
Handle
Shoe
31
Plow
Horn
Receiver
Lock Pin
Stand
Bracket
August 15, 2011