Pro Plus ® Blades; Mvp Plus™ Blades; Wide-Out™ Blades - Western HTS Owner's Manual

7-1/2' and 8' PRO-PLOW
available in both ULTRAFINISH™ powder-coated
steel and poly. The 8-1/2' model is offered in steel
only.
PRO PLUS Blades
®
Big, tough and built to last. Contractors continue
to be impressed with the strength, durability and
versatility of the PRO PLUS blade. Designed
for heavy-duty commercial and light municipal
applications, the 8', 8-1/2' and 9' PRO PLUS
line fi ts a wide range of vehicles, from 3/4-ton to
F-550-size trucks.
MVP PLUS™ Blades
Each of the MVP PLUS blade wings has a trip
edge. Heavy-duty compression springs hold
each trip edge in the plowing position (2 springs
per blade wing for 7-1/2' and 8-1/2', 3 for 9-1/2').
The springs are a safety device which allow the
trip edge to rotate back and ride over obstacles
such as low curbs, manhole covers, etc., without
Lit. No. 49513, Rev. 00
GETTING TO KNOW YOUR SNOWPLOW
Series 2 models are
®
damaging the snowplow, vehicle, or injuring
the driver. The trip springs need no adjustment
and offer protection in all blade wing positions.
Available accessories include a rubber defl ector,
bolt-on disc shoes, blade wing extensions, blade
stops and a back drag edge.
WIDE-OUT™ Blades
The WESTERN WIDE-OUT snowplow provides
®
you the ability to extend the width of your blade
hydraulically, allowing you to carry up to 40% more
snow for increased plowing effi ciency. Positions
include a retracted 8' width, 10' expanded width and
a scoop width of nearly 9'. The WIDE-OUT blade
can fully angle in the scoop position, increasing
the snow-carrying capacity while effectively
maneuvering around obstacles or turning corners.
Its dual power bar design and six vertical ribs
provide exceptional strength, while the durable
polyurethane cutting edge on each wing reduces
wear and helps protect the blade while tripping.
Available accessories include a rubber snow
defl ector, bolt-on shoe kit and a back drag edge.
20 August 15, 2011