Hydraulic System; Fluid Level - Western HTS Owner's Manual

HYDRAULIC SYSTEM

Fluid Level

CAUTION
Do not mix different kinds of hydraulic
fl uid. Some fl uids are not compatible and
may cause performance problems and
product damage.
NOTE: On MVP PLUS™ and WIDE-OUT™
blades, add fl uid only when all rams are
retracted.
NOTE: Remove fi ll plug slowly to relieve any
pressure in reservoir.
Lit. No. 49513, Rev. 00
MAINTENANCE
1. With the UltraMount
vehicle, activate the control.
2. For straight blades, any angle will do, but for
MVP PLUS and WIDE-OUT blades, move
blade wings to fully retracted (vee) position.
3. Activate the control FLOAT function and
manually collapse the lift ram all the way.
Straight Blades
Fill
Plug
Drain
Plug
89
2 system attached to the
®
MVP PLUS Blades
Fill
Plug
Drain
Cap
August 15, 2011