Basic Operation (Using Touch Panel); Main Operations - NTT docomo F-05D Instruction Manual

Basic operation (Using touch
panel)
The terminal display is composed of a touch panel
designed for being touched directly with fingers. The
terminal supports a motion sensor that senses orientation
or motion of the terminal. You can switch display view by
tilting the terminal vertical or horizontal.
◆ Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers. Do not push it forcibly with a finger or press it with
sharp objects (nail, ballpoint pen, pin, etc.).
･
Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with the touch panel wet
- Operation with finger wet by sweat or water
- Operation under water

◆ Main operations

❖
Tap/Double-tap
Tap : Touch the screen lightly and release the finger.
Operation can be valid at the instant of releasing the
finger from the screen.
Double-tap : Tap twice quickly.
❖
Touch and hold for 1 second or more
Touch and hold the screen for 1 second or more and then
release the finger. Some operations can be operated by
keeping touching the screen.
* In this manual, the operation may be described as "(1 sec. or
more)".
❖
Drag/Slide/Pan
Drag : Touch an item or icon on the screen and move it to
the desired position.
Slide : Touch the screen and drag to the desired position.
Pan : Drag the screen in some direction to view the desired
part.
30
Example : Tap
Example : Drag
Before using the terminal