Charging With Ac Adapter - NTT docomo F-05J arrows Be Instruction Manual

❖
Available charging adapter
For details, refer to the operation manual of AC adapter or DC
adapter.
AC Adapter 05 (optional) : These adapters support 100V to
240V AC. The shape of AC adapter plug is for AC 100 V
(Japanese specification). A conversion plug adapter for the
destination country is required when using an AC adapter
compatible from AC 100 V to 240 V. Also do not use a
transformer for overseas travel to charge.
DC Adapter 04 (optional) : Used to charge in a car.

◆ Charging with AC adapter

Follow the procedure below to use AC Adapter 05 (optional)
for charging.
a With the side engraved with "B" facing up, insert the
microUSB plug of the AC adapter horizontally into the
external connection jack
b Insert the AC adapter's power plug into an outlet
･
The indicator LED on the terminal lights up red while
charging, and turns off when charging is complete.
･
The indicator LED on the AC adapter lights up green
when the battery can be charged properly.
c When charging is complete, remove the AC adapter's
power plug from the outlet
d Remove the microUSB plug of the AC adapter horizontally
from the external connection terminal of this terminal
microUSB
plug
Indicator LED
◆ Charging with a PC
You can charge the terminal via a PC using USB cable A to B
01 (optional) etc.
･
When a screen of new hardware detection or operation
selection appears on the PC, select [キャンセル (Cancel)].
36
Indicator LED
External
connection
jack
To 100V
AC outlet
Power plug
AC adapter
Before using the terminal