Charging - NTT docomo DM-01G Instruction Manual

Insert docomo mini UIM card tray
d
into this terminal

Charging

Battery Charge
• A red dummy card is inserted into docomo
mini UIM card tray when you purchase this
terminal. Remove the dummy card before
charging. You cannot charge this terminal
with the dummy card inserted.
• For detailed information, refer to instruction
manuals for AC Adapter 03(optional), AC
Adapter 04(optional), microUSB Cable
01(optional) and DC Adapter 03(optional).
• AC adapter 03/04 can be used from AC 100
V to 240 V.
• The shape of AC adapter plug is for AC 100
V (Japanese speciication). A conversion
plug adapter for the destination country is
required when using an adapter compatible
from AC 100 V to 240 V. Also do not use a
transformer for overseas travel to charge.
• Do not apply excessive force when inserting
or pulling out the connector. Insert or pull it
out slowly.
• When charging with an entirely empty internal
battery, it may take a while to power on this
terminal.
Conirmation and Settings before Using
39