Android Upgrade - NTT docomo DM-01G Instruction Manual

Android Upgrade

Upgrading Android
Android upgrade is a function that connects to
the network to check whether Android upgrade
on this terminal needs to be updated, downloads
the upgrade ile when required and upgrade.
When Android upgrade is necessary, check
the notiication icon on the status bar (Android
upgrade) or DOCOMO website for information.
The following features are applied after upgrade.
• Function improvement, new functions
• Easier to operate
• Quality improvement
• New security patch
Make sure that you are using the latest version
to enable the better use of this terminal.
Note
• Android upgrade can be run with the data
saved in this terminal. However, the data
may not be protected depending on your
terminal conditions (malfunction, damage,
getting wet, etc.). It is recommended to
back up necessary data beforehand. Please
note that some data cannot be backed up.
Before Using Android
Upgrade
• Once upgrading your terminal, you cannot
downgrade to any former Android version.
• Make sure to upgrade with battery fully
remained.
• docomo mini UIM card is required when
upgrading. Also apply to sp mode if you use
packet communication.
• Exit all applications before upgrading.
Android upgrade is terminated when other
applications are activated while upgrading.
• Do not power of while upgrading.
• While upgrading, all functions of this terminal
including making and receiving a call cannot
be used.
• The following situations make it unavailable
to upgrade.
- When you are on a call
- When out of the service area is displayed
- During international roaming
- In Airplane mode
- While tethering
- When the date or time has not been set
correctly
- Remained battery is not enough
- Free space in this memory is not enough
- During updating software
Appendix/Index
283