Ipv6 Lan Config - D-Link DSL-2642B User Manual

Section 3 – Configuration
To access the IPv6 LAN config window, click the IPv6 LAN Config button in the Advanced directory.
The Router supports to be IPv6 host.
Enable DHCPv6 Server: Tick the check box to enable the Router as
DHCPv6 server.
Enable RADVD: RADVD advertises the IPv6 prefix to the local network,
so that a new client can generate its own IP address.
IPv6 Site Prefix configuration Type: Select to get the prefix from WAN
or add a static site prefix.
Delegated from WAN: Click this radio button to get the prefix from
WAN.
WAN Interface selected: Select a WAN interface from the drop-down
menu.
Static: Click the radio button to have a site prefix configured below.
Site Prefix: Enter the site prefix.
Site Prefix Length: Enter the site prefix length.
Enable MLD Snooping: Tick the check box to enable MLD snooping.
D-Link DSL-2642B User Manual

IPv6 LAN Config

71