NEC SL100 Programming Manual page 488

SL1000
Item No.
17
18
Program
84
28
30
31
32
33
35
36
37
38
39
40
41
42
43
2-466
Item
Jitter Buffer Mode
Set the mode of the Jitter Buffer.
1 = Size set to the fixed amount for the codec.
2 = The minimum/maximum range for the codec is
used.
3 = The minimum/maximum range for the codec is
used and adjusts at any time, regardless of silence.
Silence Compression (VAD) Threshold
Set the voice level judged to be silence. Change
value based .30
This entry is ignored if silence compression is dis-
abled in 84-01-03 with G.711 or 84-01-06 with
G.729.
Priority Codec Setting
The option selected here determines what other
codec options are applied by priority.
EchoAuto Gain Control
Define the Auto Gain Control.
DTMF Payload Number
Define the DTMF Payload Number.
DTMF Relay Mode
Determine the DTMF setup.
G.722 Audio Frame
Maximum number of G.722 Audio Frames. G.722
assumes the audio signal made by a specimen by
16 kHz and the frame of 10 ms is assumed to be a
unit to 64 kbps by the encoding compressed
method.
G.722 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of G.722
is set. Jitter is the variation in the time between
packets arriving and the buffer allows this variation
to be absorbed.
G.722 Jitter Buffer - Standard
Set the average G.722 Jitter Buffer.
G.722 Jitter Buffer - Maximum
Set the maximum G.722 Jitter Buffer.
G.726 Audio Frame
Maximum number of G.726 Audio Frames. G.726
assumes the audio signal made by a specimen by
16 kHz and the frame of 10 ms is assumed to be a
unit to 32 kbps by the encoding compressed
method.
G.726 Silence Compression Mode
Select whether to compress silence with G.726.
When there is silence, the RTP packet is not sent.
G.726 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of G.726
is set. Jitter is the variation in the time between
packets arriving and the buffer allows this variation
to be absorbed.
G.726 Jitter Buffer - Standard
Set the average G.726 Jitter Buffer.
G.726 Jitter Buffer - Maximum
Set the maximum G.726 Jitter Buffer.
iLBC Audio Frame
Maximum number of iLBC Audio Frames. iLBC as-
sumes the frame of 10 ms is a unit.
Input Data
1 = static
3 = adaptive immediately
1 ~ 30
(self-adjustment and - 19 dB ~ +
10dB)
1 = - 19 dB (- 49 dBm)
:
20 = 0dB (- 30 dBm)
:
29 = 9 dBm (- 21 dBm)
30 = 10dBm (- 20 dBm)
0 = G.711 PT
1 = G.723 PT
2 = G.729 PT
3 = G.722 PT
4 = G.726 PT
5 = iLBC PT
0 ~ 5
96 ~ 127
0 = Disable
1 = RFC2833
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
0 ~ 255 ms
0 ~ 255 ms
0 ~ 255 ms
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
0 = Disable
1 = Enable
0 ~ 255 ms
0 ~ 255 ms
0 ~ 255 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
Program 84 : Hardware Setup for VoIPDB
ISSUE 1.1
Default
3
20
0
0
110
0
3
30
60
120
3
0
30
60
120
3