Toll Restriction Class - NEC SL100 Programming Manual

ISSUE 1.1
Level
IN
Description
Use Program 21-05 : Toll Restriction Class to set the system Toll Restriction classes (1 ~ 15).
Input Data
Toll Restriction Class Number
Item
Item
No.
01 International Call Restriction Table
This option assigns/unassigns the
International Call Restrict Table for
the Toll Restriction Class you are pro-
gramming. Enter International Call
Restrict Table data in Program 21-06-
01.
02 International Call Permit Code
Table
This option assigns/unassigns the
International Call Permit Table for the
Toll Restriction Class you are pro-
gramming. Enter International Call
Permit Table data in Program 21-06-
02.
04 Maximum Number of Digits Table
Assignment
Select the table (defined in 21-06-03)
to be used to determine the maxi-
mum number of digits allowed for
outgoing calls.
05 Common Permit Code Table
It chooses whether the table set up
by 21-06-04 is referred to, or not re-
ferred to.
06 Common Restriction Table
It chooses whether the table set up
by 21-06-05 is referred to, or not re-
ferred to.
07 Permit Code Table
Set the tables 1 ~ 4 when referring to
the table set up by 21-06-06.
08 Restriction Table
Set the tables 1 ~ 4 when referring to
the table set up by 21-06-07.
09 Restriction for Common Speed
Dials
Use this option to enable/disable Toll
Restriction for Common Speed Dial-
ing numbers. If enabled, System
Speed Dialing numbers have the
same restrictions as manually dialed
numbers.
10 Restriction for Group Speed Dials
Use this option to enable/disable Toll
Restriction for Group Speed Dialing
numbers. If enabled, Group Speed
Dialing numbers have the same re-
strictions as manually dialed num-
bers.
Programming Manual
Program 21 : Outgoing Call Setup

21-05 : Toll Restriction Class

Input Data
0 = Unassigned (No)
1 = Assigned (Yes)
0 = Unassigned (No)
1 = Assigne02 d
(Yes)
1 ~ 4 = Table
0 = Disable (None)
0 = Unassigned (No)
1 = Assigned (Yes)
0 = Unassigned (No)
1 = Assigned (Yes)
1 ~ 4 = Table
0 = Disable (None)
1 ~ 4 = Table
0 = Disable (None)
0 = Does Not Restrict
1 = Following Re-
striction Check
0 = Does Not Restrict
1 = Following Re-
striction Check
1 ~ 15
Related
Default
Program
0 21-06-01
0 21-06-02
0 21-06-03
0 21-06-04
0 21-06-05
0 21-06-06
0 21-06-07
0
0
SL1000
Program
21
Note
2-217