NEC SL100 Programming Manual page 393

ISSUE 1.1
Item No.
12 Wait Between RNA Non-Pager Callout Attempts
(Notify RNA Intvl)
Use this option to set how long InMail waits (1 ~
255 minutes), after it dials an unanswered non-
pager callout destination, before retrying the call-
out number.
There are 3 types of unanswered non-pager call-
outs:
• If the callout rings the destination longer than
the 47-01-13: Wait for Answer Non-Pager Call-
out Attempts option.
• If the destination answers, says Hello (or the
system detects answer supervision) and then
hangs up without dialing 1 to log onto their
mailbox. This typically happens if someone un-
familiar with notification answers the callout, or
if the callout is picked up by an answering ma-
chine.
• If the destination answers and then hangs up
without saying Hello. This typically happens if
someone unfamiliar with the notification an-
swers the callout (like the above example), or if
the call is picked up by an answering machine
with insufficient outgoing message volume.
13 Wait for Answer Non-Pager Callout Attempts
(Notify RNA Rings)
If a non-pager callout rings the destination longer
than this interval (1 ~ 99 rings), InMail marks the
call as unanswered (Ring No Answer) and hangs
up.
14 Number of Callout Attempts
(Notify Call Attmpt)
Use this option to set how many times (1 ~ 99
rings) InMail retries an incomplete Message Notifi-
cation callout.
This total includes unacknowledged callouts, call-
outs to a busy destination, and callouts to an unan-
swered destination. This option applies to pager
and non-pager callouts.
15 Send Pager Callout Until Acknowledged
(Retry Until Ack)
When this option is enabled (1), InMail continues
to retry a digital pager Message Notification callout
until the notification is acknowledged.
If this option is disabled (0), InMail retries a digital
pager Message Notification the number of times
specified in 47-01-14 Number of Callout At-
tempts. This option does not apply to Message
Notification callouts to telephone numbers.
A digital pager notification is considered acknowl-
edged when the recipient logs onto the mailbox.
16 Name Format
Specify if names are displayed in First-Last format
or Last-First.
17 InMail Port
Specify the port number of the first InMail Port.
18 Play PAD Control
19 Record PAD Control (for Networking)
Conditions
• When changing 47-01-01 or 47-01-02, a system reset is required for the new setting to take effect.
Programming Manual
Item
1 ~ 255 minutes
1 ~ 99 rings
1 ~ 99 rings
0 = No (Disabled)
1 = Yes (Enabled)
0 = First-Last
1 = Last-First
0 ~ 113
The first port of InMail must start
with one of the following ports:
1, 5, 9, 12, 16, ...... 237, 241,
245, 249 and uses the first port
assigned + next three consecu-
tive ports.
1 ~ 63
(- 15.5 dBm ~ + 15.5 dBm)
1 ~ 63
(- 15.5 dBm ~ + 15.5 dBm)
Input Data Default
30 minutes
SL1000
Program
47
5 rings
1 ring
0
0
0
32
32
2-371