Slot Control - NEC SL100 Programming Manual

Digital
Table of Contents

Advertisement

ISSUE 1.1
Level
IN
Description
Note: This program is available via telephone programming and WebPro not through PC Program-
ming.
Use Program 90-05 : Slot Control to reset or delete (uninstall) units (slots 1 ~ 16).
Delete allows you to completely uninstall the unit. You should do this if you want to remove a unit and
plug it into a different slot and still retain the port assignments. If a different type of interface unit is
being installed in a slot previously used, the slot should be deleted (option 1) first before installing the
new interface unit.
Reset allows you to send a reset code.
Input Data
Menu Number
Item No.
01

Slot Control

Conditions
• When you delete or reset a unit, you must first remove it from its slot then run Program 90-05.
When reusing the slot for another unit, you must plug the unit in or reset the system before the sys-
tem can use the slot again.
• When you delete or reset a unit, all related programming in Program 10-03-01 is set back to default.
Feature Cross Reference
None
Programming Manual
Program 90 : Maintenance Program
Item
Slot Number 0 ~ 16
90-05 : Slot Control
1 = Delete
2 = Reset
3 = Set Busy Out
4 = Reset Busy Out
Input Data
SL1000
Program
90
2-493

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents