Loading Media From An External Supply - Intermec PM4i User Manual

Loading Media From an External Supply

PM4i Mid-Range Printer User's Manual
You can place the media supply, such as fanfold tickets or tags, behind
the printer. The external supply can be used with tear-off (straight-
through) and cut-off printing.
Intermec strongly recommends using a printer fitted with a special
fanfold guide. This guide makes loading media easier and accurately
guides the media. The fanfold guide can be adjusted for various media
widths down to 40 mm (1.57 in).
Note: Make sure to protect the media from dust, dirt, or other foreign
particles that can impair the printout quality or cause unnecessary
wear to the printhead.
Fanfold Media Path
Chapter 1 — Using the Printer
29