Intermec PM4i User Manual page 62

Chapter 2 — Connecting the Printer
48
To set up the printer to work in your wireless network, you need:
• a serial cable.
• a PC running Windows or Linux.
• PrintSet. PrintSet is available on the CD that ships with your
Printer. For the latest version of PrintSet, go to the Downloads
page of the Intermec website at www.intermec.com.
• (optional) Serial port software such as HyperTerminal. If you are
using IPL commands with HyperTerminal, you may want to be
able to see the commands as you type them on your screen. For
help, see "Configuring Your Printer With Commands Sent
From Your PC" on page
To set up the printer for 802.11 communications using PrintSet
1 Download and install PrintSet on your PC.
2 Connect one end of the serial cable to your printer, and connect
the other end to your PC.
3 If necessary, change the serial port settings on your PC to match
your printer:
Parameter
Baud rate
Data bits
Parity
Stop bits
4 On your PC, start PrintSet.
5 In the General Tasks box, click Add Printer.
6 Step through the Add Printer Wizard until you have successfully
added your printer.
7 In the Printer Tasks box, click Wireless Setup Wizard.
8 Step through the Wireless Setup Wizard to set up wireless network
and security parameters.
78.
Default Setting
9600
8
None
1
PM4i Mid-Range Printer User's Manual