Intermec PM4i User Manual page 139

PM4i Mid-Range Printer User's Manual
Tickets With Gaps (Gap Stock)
Media Width (a)
Measurement Value
Maximum 114.3 mm (4.50 in)
Minimum 25.0 mm (1.00 in)
Copy Length (b)
Measurement
Maximum length between slots Dependent on SDRAM size
Minimum length between slots 8.0 mm (0.32 in)
Note: Under ideal circumstances, a minimum ticket length of 4 mm
(0.16 in) could be used. It requires the sum of the copy length (b) and
the detection slit height (e) to be larger than 7 mm (0.28 in), that batch
printing is used, and that no pull back of the media is performed.
Intermec does not guarantee that such short tickets will work, but it is
up to users to test this in their unique application.
LSS Detection Position (c)
This position is variable. For help, see
Sensor" on page 99.
Detection Slit Length (d)
The length of the detection slit (excluding corner radii) must be a
minimum of 2.5 mm (0.10 in) on either side of the LSS detection
position (c).
Detection Slit Height (e)
Measurement Value
Maximum 21.3 mm (0.83 in)
Recommended 1.6 mm (0.06 in)
Minimum 1.2 mm (0.05 in)
Appendix A — Specifications
Value
"Adjusting the Label Stop
125