Configuring Mail Settings - Intermec PM4i User Manual

PM4i Mid-Range Printer User's Manual
Understanding the General Network Settings (continued)
Setting
Restrictions

Configuring Mail Settings

Use the mail settings page to view and change e-mail (SMTP) server
settings.
To configure mail settings
1 Click Network Admin > Mail.
2 Select the mail server settings and enter mail addresses.
3 Click:
• Submit Mail Settings to send the changes to the printer.
• Submit & Send test mail to send the changes to the printer
and test your new settings.
Chapter 3 — Configuring the Printer
Description
Sets restrictions on who is allowed to upgrade the
printer firmware or view and change network settings.
You cannot remove "admin" from the list of authorized
users.
Users allowed to update: Defines who may perform a
firmware upgrade using FTP, PrintSet, or IFAB. This
setting does not affect upgrading from a Compact
Flash card.
Users allowed to read/write protected LAN1
settings: (Fingerprint only) Defines who may read/
write settings in the LAN1 section.
Users allowed to change network settings:
(Fingerprint only) Defines who may change the
network node in the setup. This setting is not
supported if you are setting up the printer from its
internal keyboard.
Users allowed to change wireless settings: Defines
who may change WLAN or 802.1x settings.
69