Installation guide overview
This overview is intended to provide installation information at a high level. Further detail on
each of the steps are provided in the following pages.
Before installation
Unpack the appliance and
components, and check for
damage. DO NOT install any
damaged parts.
Check all components have been
supplied, and that you have the
correct gas type.
Read these instructions to get an
overview of the steps required
before starting the installation.
Failure to follow these instructions
could cause a malfunction of
the appliance. This could result
in serious injury and/or property
damage.
Installation overview
1. Build the frame and complete
electrical connection.
2. Install brackets, Symmetry
unit, and fix the unit to the
frame.
3. Install flue and complete gas
connection.
4. Install ducting kit (if
purchased), and gas pipe.
5. Install flue restrictor (if
required), log set, test
pressures, and establish flame
pattern.
6. Install cladding.
7. Fit inner frame, outer
frame, and mesh guard (if
purchased).
8. Complete commissioning
checklist.
1.
3.
5.
7.
2.
4.
6.
8.
RDV3611 Installation Manual: 11156-A 01-12 | 9