Evolve Installation Overview - Rinnai Evolve 952 Series Installation Manual

Evolve installation overview

1. Construct a frame as per
enclosure dimensions on p. 9.
4. Connect the flue system.
7. Commission the unit and
check the Wi-Fi connection, p.24.
10. Complete the installation
checklist in the operation
guide and complete customer
handover.
14 | Evolve 952/1252 Installation Guide: 13115-E 05-19
2. Line wall—could also plaster
at this stage.
5. Install the unit into the
enclosure , screw to frame, and
1
complete the gas, air hose, and
flue connection (p.16).
8. Install the outer frame, mesh
guard (if purchased), and inner
frame, p.25.
Two hand-holds, either side of the unit, have been added to help move and
1
lift the fire into place.
3. Complete the gas connection,
refer p.7. Electrical supply can
also be completed at this point.
6. Install the burn media, refer
p.18-23.
9. Test operation and lighting
sequence, p.26.