Fixing The Unit To The Frame - Rinnai Symmetry RDV3611 Installation Manual

Fixing the unit to the frame

The Symmetry RDV3611 comes pre-assembled with the burner already in position. For all
installations, the unit MUST BE positioned on a level surface.
1. Position the unit inside the
cavity.
2. Bend and secure the two
metal standoffs supplied with
the unit into position. These
provide the required 150 mm
vertical clearance to the upper
lintel.
3. Fix the unit to the frame
with the four mounting
brackets. These act as
seismic constraints, as well
as providing the horizontal
clearance to the frame.
4. Install glass front, this will
help protect the unit while the
remaining installation work is
completed.
The carton in which the
Symmetry is packaged has a
cardboard cutout that is the
same size as the glass frame.
This can be used to protect the
unit during installation.
Step 2: Bend and secure metal standoffs
Step 3: Fix unit to the frame with the four mounting brackets
RDV3611 Installation Manual: 11156-A 01-12 | 11