Adjustment/Maintenance - Kyocera FS-1024MFP Operation Manual

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
• Copy Denst. Adj. ...8-71
• Send/USB Density ...8-72
• Correct. Bk Line ...8-73
• New Developer...8-74
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Denst. Adj.
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
Sys. Menu/Count.:a b
9
USB Memory
:
Edit Destinations
;
********************* Adjust/maint.
Adjust/Maint.:
1
********************* Copy Denst. Adj.
2 Send/USB Density
3
Correct. Bk Line
Copy Denst. Adj.: a b
1
********************* Auto
2
Manual
OPERATION GUIDE
1
[ Exit ]
2
a b
[ Exit ]
3
4
[ Exit ]
5
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the
key to select [Adjust/Maint.].
Press the OK key. The Adjust/Maint. menu
appears.
Press the or key to select [Copy Denst. Adj.].
Press the OK key. Copy Denst. Adj. appears.
Press the or key to select [Auto] or [Manual].
or
8
8-71