Kyocera FS-1024MFP Operation Manual page 255

Error Message
Top tray is full of
Paper.
Remove the paper.
Unknown toner
Installed.
Unknown toner
Installed. PC
Insufficient memory.
Cannot start the job
Replace Process Unit.
OPERATION GUIDE
Checkpoints
–
–
–
–
–
–
Corrective Actions
Remove paper from the top tray, and
press the OK key to resume the job.
If the toner container was taken from
a different machine of the same
model while it was displaying the Add
toner. message, ignore the message
and use the toner.
This message is displayed if the
installed toner container's regional
specification does not match the
machine's.
Install the specified toner container.
This message is displayed if the
installed toner container is non-
genuine.
The manufacturer assumes no
liability for problems caused by a
non-genuine toner container.
We recommend that you only use
genuine toner containers.
When you want to use the toner
container currently installed, press
the OK key and Stop key
simultaneously for 3 seconds or
more.
Further scanning cannot be
performed due to insufficient memory.
Press the OK key to print the
scanned pages. Press the Cancel
key to cancel the printing job.
Replacement of the parts in the
maintenance kit is necessary at every
100,000 pages of printing and
requires professional servicing.
Contact your service technician.
Troubleshooting
Reference
Page
—
—
—
—
10
—
—
10-7