Kyocera FS-1024MFP Operation Manual page 82

Basic Operation
ID Card Copy
The procedure for using ID Card copying is explained below. Before using this function, confirm ID Card Copy
is displayed on the Right or Left Select key. For details, refer to ID Card Copy on 8-56.
3-14
1
Press the Copy key when the Copy key/indicator
is off.
NOTE:
If the Message Display is turned off, press the
Power key and wait for the machine to warm up.
2
Place the original on the platen.
Put the scanning side facedown in the center of
Statement or A5 size scanning area.
NOTE:
For loading instructions, refer to Loading
Originals on page 2-29.
3
Press [ID Card] (the Right or Left Select key). The
ID Card Copy screen is displayed.
The ID Card Copy function is recalled.
4
Press the Start key. Scanning begins.
5
Turn over the original on the platen and press the
Start key.
6
After scanning all originals, press [End Scan] (the
Right Select key) to start copying.
OPERATION GUIDE