Glossary - Kyocera FS-1024MFP Operation Manual

Glossary

Auto Form Feed Timeout
During data transmission, the machine may sometimes have to wait until receiving the next data. This is the auto
form feed timeout. When the preset timeout passes, the machine automatically put paper out. However, no
output is performed if the last page has no data to be printed.
Auto Paper Selection
A function to automatically select paper in the same size as original at printing
Auto Sleep Mode
A mode designed for electrical power saving, activated when the machine is left unused or data transfer for a
specific period. In Sleep mode, power consumption is kept to a minimum.
dpi(dots per inch)
A unit for resolution, representing the number of dots printed per inch (25.4 mm).
EcoPrint Mode
A printing mode that helps save toner. Copies made in this mode are thus lighter than normal.
Grayscale
A computer color expression. Displayed images of this sort are typically composed of shades of gray, varying
from black at the weakest intensity to white at the strongest, without any other colors. Gray levels are displayed
in numerical levels: that is, white and black only for 1 bit; 256 gray levels (including white and black) for 8 bits;
and 65,536 gray levels for 16 bits.
Manual Feed Tray
The paper supply tray on the center of the machine. Use this tray instead of the cassette when printing onto
envelopes, Hagaki, transparencies, or labels.
PPM (prints per minute)
This indicates the number of A4 size printouts made in one minute.
Printer Driver
The software to enable you to print data created on any application software. The printer driver for the machine
is contained in the CD-ROM enclosed in the package. Install the printer driver on the computer connected to the
machine.
Status Page
The page lists machine conditions, such as the memory capacity, total number of prints and scans, and paper
source settings.
OPERATION GUIDE Appendix-19