Editing Device Administrator - Kyocera FS-1024MFP Operation Manual

Editing Device Administrator

You can edit the properties of device administrator. The table below explains the device administrator
information to be registered
Item
User Name
Login User Name*
Login Password*
* Mandatory at user registration.
NOTE:
By default, the device administrator right is already stored. The following are the default properties.
User Name: DeviceAdmin
Login User Name: 2400
Login Password: 2400
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
Use the procedure below to edit settings.
NOTE:
Refer to Character Entry Method on Appendix-2 for details on entering characters.
Sys. Menu/Count: a b
4
Counter
5
System
6 Administrator
*********************
Login User Name
*******************
Login Password:
OPERATION GUIDE
Enter the name displayed on the user list (up to 32 characters).
Enter the login user name to log in (up to 32 characters). The same login user
name cannot be registered.
Enter the password to log in (up to 64 characters).
[ Exit ]
L b
[ Login ]
Default Setting (System Menu)
Description
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the
key to select [Administrator], and then press the
OK key.
3
The login screen appears. Enter your login user
name and password and then press [Login]. Refer
to Editing Device Administrator on page 8-87 for
the default login user name and password.
8
or
8-87